K9 Ductile Iron Pipe-310S Stainless Steel Coil-Wugang Steel

Welcome to Wugang Steel (Wuxi) Co., Ltd

Whatsapp:+86 18601565830 Email : sales@wxwugangsteel.com

HOME
ABOUT US
PRODUCT CENTER
SERVICE
NEWS
CONTACT US

language

PRODUCT CENTER

Our company covers various kinds of Stainless steel and carbon steel materials , such as hot rolled / cold rolled stainless steel coils / sheet , Seamless / welded stainless steel pipe ( tube ).

Corrugated Roofing Sheet

316L Stainless steel plate

316L stainless steel is commonly used in pulp and paper making equipment, heat exchanger, dyeing equipment, film processing equipment, pipes, materials used for the exterior of buildings in coastal areas, as well as watch chains and case of advanced watches.

Ductile Iron Pipe

The essence of cast iron steel pipe is ductile iron pipe, because ductile iron pipe has the essence of iron and the performance of steel, so it is called this. Graphite in ductile iron pipes exists in spherical form, and the size of general graphite is 6-7 grades. In terms of quality, it is required that the spheroidization level of cast iron pipes should be controlled at 1-3 levels, and the spheroidization rate should be ≥ 80%. Therefore, the mechanical properties of the material itself have been better improved, and it has the essence of iron and the performance of steel. After annealing, the metallographic structure of the ductile iron pipe is ferrite plus a small amount of pearlite, and the mechanical properties are good, so it is also called cast iron pipe.

Galvanized sheet

Galvanized steel is mild steel with a coating of zinc. The zinc protects the steel by providing cathodic protection to the exposed steel, so should the surface be damaged the zinc will corrode in preference to the steel.

Structural Steel Pipe

Structural Steel Pipe. A wide range of applications rely on structural steel pipe for strength and stability. Gnee steel supply welded and seamless pipe for structural applications to customers in all industries. As a leading steel pipe supplier, Gnee steel offers a large inventory of pipe and tubing sizes from 1/8” NPS to 48” NPS.

ST12 Cold Rolled Steel Sheet

ST12 is German standard (DIN1623), It's ordinary cold rolled steel. In principle, ST12 can only be bent and formed, and no stamping is allowed.

A53 Carbon steel pipe

Application: It is suitable for stress and pressure parts, as well as steam, water, gas and air pipelines for general purposes. A53 pipeline pipe belongs to American petroleum standard pipeline pipe. Pipeline pipe is used to transport oil, steam and water pumped out of the ground to oil and natural gas industrial enterprises through pipeline pipe. Pipeline pipe includes seamless pipe and welded steel pipe, with flat end, threaded end and socket end at the pipe end; The connection methods are end welding, coupling connection, socket connection, etc.

PPGI DC01

PPGI is galvanized color plate, PPGL is galvanized color plate, both are color plates, the substrates are different, one is galvanized structure, the other is galvanized structure, the substrate is different, which determines the difference in performance. DC01 Galvanized steel coil is used for automobiles, sanitary ware, food machinery, pressure vessels, nuclear power, chemical equipment, elevators, rail transit, machinery manufacturing, structural piping, and architectural decoration.

Stainless steel channel

Hot rolled stainless steel light channel steel (YB164-63) Hot rolled light channel steel is a kind of steel with wide legs and thin walls, which has better economic effect than ordinary hot rolled channel steel. Main use: for building and steel structure.

WUGANG STEEL(WUXI) Co.,Ltd

- ABOUT US -

We were established in 2013, the company is located in Jiangsu Province, China, with superior geographical location and convenient transportation.

It is a large-scale steel production enterprise in the Yangtze River Delta region.

The company has assets of 3.8 billion yuan, covers an area of 450,000 square meters, and has more than 1,500 employees, including 70 technical engineers and 30 management personnel.

With more than 3,000 independent patents, the annual output of steel products exceeds 5 million tons, and the inventory exceeds 200,000 tons.

2013 +

Establish in 2013

3.8 billion

has assets of 3.8 billion yuan

450000 ㎡

covers an area of 450,000 ㎡

1500 +

has more than 1,500 employees

3000 +

More than 3,000 independent patents

5 million tons

The annual output of steel products exceeds 5 million tons,

200000 ㎡

the inventory exceeds 200,000 tons

SERVICES WE PROVIDE

By cooperating with us, construction companies or development companies will use the world's most advanced automated steel processing production lines to provide specialized steel processing, distribution, services, and provide steel engineering system solutions, which can help you obtain the following aspects in construction Value enhancement and competitive advantage of:

1. Reduce the cost of steel bars

2. Optimize the organization of construction

3. Choose a professional service

4. Save time for material preparation

5. Reduce the occupation of inventory

6. Reduce on-site labor

7. Reduce energy consumption on site

8. Save tense space

9. Reduce intermediate links

10. Improve the transparency of costs

11. Ensure the cleanliness of the site

12. Simplify on-site management

13. Guarantee the quality of construction

14. Reduce safety hazards

15. Reduce noise pollution

16. Reduce disturbing disputes

17. Reduce Coordination Matters

18. Maintain the image of the company

Strip Processing

A steel plate with a thin thickness, a narrow width, and a long length. Its width is generally 20mm-200mm. Supplied in rolls, its specifications are expressed in thickness×width. According to the quality of the steel, it can be divided into high-quality and ordinary strip steel; according to the rolling method, it can be divided into two types: hot-rolled and cold-rolled, which are called hot-rolled strip and cold-rolled strip respectively. The thickness of common hot-rolled steel strip is 2mm-6mm, and the thickness of cold-rolled steel strip is generally 0.05mm-3.60mm. Strip steel can be made of common carbon steel, carbon steel, spring steel, tool steel, stainless steel and other steel types. Widely used in the manufacture of welded pipes, clamps, washers, spring blades, saw blades, blades, etc.

Vevel & Edge Chamfering

For easy welding or connecting, our clients usually ask us to do the bevel & edge chamfering process for stainless steel sheets. Edge chamfering machine,which can quickly chamfer both sides of stainless steel sheets at the same time and achieve a good finish.

Rolling

The metal billet is passed through the gap between a pair of rotating rolls (various shapes), and the cross-section of the material is reduced and the length is increased due to the compression of the rolls. This is the most commonly used production method for steel production. It is mainly used to produce profiles, Plates, pipes. There are two kinds of hot rolling and cold rolling.

Polishing

WuGang steel experience in polishing stainless steel surfaces began in 2011, initially as a polishing service for neighboring stainless steel distributors and manufacturing workshops. As demand has increased dramatically, polished stainless steel sheet has become one of our main products. In this field, we can provide any specific Ra or grit finish – as fine as a 3 Ra Max. near-mirror.

Water jet cutting

Waterjet cutting high-pressure water jet cutting technology is a machine that uses high-pressure water flow to cut. All workpieces can be carved at will under the computer’s control, and will not be affected by the texture of the material. Because of its low cost, easy operation, and high yield rate, waterjet cutting is becoming the mainstream cutting method in industrial cutting technology.

Bend

Under the pressure of the bending machine, the stainless steel sheet first undergoes elastic deformation, then enters plastic deformation. At the beginning of the plastic bending, the steel sheet is free to bend. With the upper or lower molds applying pressure on the material, the steel sheet and the inner surface of the V-groove’s lower mold are gradually approaching. At the same time, the radius of curvature and bending force arm also become shorter, and the equipment continues pressing until the stroke ends to make complete contact between upper and lower molds and sheet at three points. Then, a V-shaped bend ends. That is bending. With a maximum bending tonnage of 3,000 tons, WuGang Steel can bend stainless steel sheets up to 15,000mm in width. Before placing the order, please send us drawings to ensure accuracy in the production.

NEWS CENTER

Our company covers various kinds of Stainless steel and carbon steel materials , such as hot rolled / cold rolled stainless steel coils / sheet , Seamless / welded stainless steel pipe ( tube ).

Designing with Durability: Incorporating 2507 Stainless Steel Round Bar in Architectural Projects

Designing with Durability: Incorporating 2507 Stainless Steel Round Bar in Architectural Projects Table of Contents 1. Introduction to 2507 Stainless Steel 2. Key Properties of 2507 Stainless Steel Round Bar 2.1 Corrosion Resistance 2.2 Strength and Durability 2.3 Aesthetic Qualities 3. Applications in Architectural Design 3.1 Structural Components 3.2 Decorative Elements 4. Benefits of Using 2507

Mar 01,2025

Understanding the Applications and Benefits of 2507 Stainless Steel Round Bar

The 2507 stainless steel round bar is known for its unique composition, which typically includes a balance of chromium, nickel, and molybdenum. This high-performance alloy belongs to the duplex stainless steel family, which combines the best features of both austenitic and ferritic stainless steels. One of the standout characteristics of the 2507 grade is its remarkable strength and resistance to

Feb 24,2025

The Evolution of 2507 Stainless Steel Round Bar: From Production to Application

The Evolution of 2507 Stainless Steel Round Bar: From Production to Application Table of Contents 1. Introduction to 2507 Stainless Steel Round Bar 2. Understanding 2507 Stainless Steel 3. Production Process of 2507 Stainless Steel Round Bar 4. Properties and Benefits of 2507 Stainless Steel 5. Applications Across Industries 6. Innovations in Production Techniques 7. Future Outlook

Feb 19,2025

Understanding 2507 Stainless Steel Round Bar: Properties and Applications

The 2507 stainless steel round bar is a remarkable alloy known for its excellent mechanical properties and corrosion resistance. It falls under the category of duplex stainless steels, which means it contains a balanced microstructure of austenite and ferrite. This unique composition gives 2507 stainless steel its distinctive characteristics, making it suitable for demanding environments. One of t

Feb 14,2025